Guide :Ice Cream Makers : ICE-30BC 2 Quart Ice Cream Maker

The lid will not lock and stay on during churning

After two successes with this machine, I soon found that the lid will not lock into place on the ice cream maker. I now must resort to taping the lid onto the machine to keep the stirring instruments in. I don?t know what to do. Also, because I have to tape the lid, the blades are not rotating properly but the ice cream is still good. I just would like to fix this problem without tape help. Any help would be lovely!

Research, Knowledge and Information :

Amana Washer Door or Lid Won't Lock -

Most Frequent Causes for Washer door or lid won't lock. ... The door lock secures the washer door shut during operation. Once the washing machine door is closed, ...
Read More At :

Questions and Answers for Whirlpool W10404050 Lid Latch ...

For Whirlpool Lid Latch Assembly (Part Number: AP5263307) Ask a ... If all are good and it tries to unlock but can not, then the lid lock assembly will need to be ...
Read More At :

Windows 8: How to Lock (not sleep) laptop on lid close ...

If my laptop is connected to power source and is not configured to sleep on lid ... How to Lock (not sleep) laptop on lid ... will be good to lock it if I close a lid.
Read More At :

Whirlpool washing machine_ lock light flashing_ nothing else ...

Mar 02, 2012 · Whirlpool washer wont start a cycle, lid does lock and the lock light keeps flashing on and off. At the start of the cycle the lid locks, then goes through ...

Kenmore Whirlpool top load washer. lid lock issues - YouTube

Mar 11, 2013 · Whirlpool Top-Load Washer Lid Lock Replacement #W10404050 - Duration: 3:13. 226,447 views. 3:13. Washer Not Spinning ...

How to keep Num Lock from constantly turning off? - Microsoft ...

How to keep Num Lock from constantly turning off ... num lock will stay on for ... OR Wakeup or Choose what the power buttons do OR Choose what closing the lid ...
Read More At :

Blinking Lid Lock - Appliance Repair Forum

Discuss Blinking Lid Lock in Washer Repair. "Sorry if this is a repeat post. I've seen a lot of people online with this exact same problem, but
Read More At :

How to Change What Closing the Laptop Lid Does - dummies

How to Change What Closing the Laptop Lid Does; ... Similar power options exist for desktop PCs, but not the “close the lid” options, for obvious reasons.
Read More At :

Suggested Questions And Answer :

The lid will not lock and stay on during churning

Here is a link to the manual if you need it; It sounds like somehow the little locking lugs on either the lid or the bit it locks to have broken off. if it is the lid, then you should be able to get a new one from cuisinart - check the manual for details, otherwise you probably have to either try and rebuild them by carving another piece of plastic the same and glueing it on. a new body piece may be available, check with cuisinart, but my guess is that you are stuck with tape - or my idea would be a large rubber/elastic band, so you can re-use it. Hope this helps :)
Read More At : ICE-30BC 2 Quart Ice Cream Maker...

Ice-cream maker doesn't fit together

Do a 1/2 to 2/3 batch. Put a book and a soup can on top of the mixing arm to keep it down.The machine does make wonderful Ice cream, however it is noisy and fiddly. Do not try the full batch as it just doesn't work. I find doing 2 half size batches works best. Also find a spare room to run the noisy beast in.
Read More At : ICE-50BC 1.5 Quart Ice Cream Maker...

Not churning corectly

This sounds like a low on charge condition which you probably won't be able to repair yourself unless you are a refrigeration technician. There is a possibility that the cooling fan is not operational or the condenser is dirty. Two things that are very easy to check. First check the temperature of the tubing going to and from the compressor. Both will be hot if this is your problem. Blow out the condenser with compressed air. If it is greasy, use a cleaner. If the fan motor is not running, check for voltage at the motor. If there is no voltage check the switch and wiring. If there is replace the motor. If everything is clean and running the tubing from the compressor to the condenser should be hot to warm and the outlet around room temp. Run your fingers down the side of the condenser from the inlet. If it is cool after the first tubing bend, it is low on charge most likely and is probably not worth repairing.
Read More At : 4050 Il Gelatao Magnum 1 Quart Ice Cream Maker...

I need to register my ice cream maker - Cuisinart ICE-30BC 2 Quart Ice Cream Maker

Hi Cheryl,Your ice cream maker can be registered at this webpage: this helps!
Read More At : ICE-30BC 2 Quart Ice Cream Maker...

I need a new lid for my Richmond Cedar Work Manufacturing, Sterling Freezer 5 Quart ice cream maker. I understand that Rival bought them out and the motorised 8550-X unit looks like it might have the same lid. The lid turns the cannister and the paddle stays stationary. Do you know where I can purchase a new lid for this ice cream maker? Thanks - Stevo

Yes, the Rival 8550 and RCW 5-qt lids are the same. They're sometimes available here:
Read More At : 8550-X 5 Quart Ice Cream Maker...

Problems with "easy-lock" lid

We have found that the diameter of the lid is slightly smaller than the casing it is to fit on. I have to physically force the lid in place, and then pry the lid off afterwards. If the lid is not in place, the churn arm will be allowed to move and no churning will occur.
Read More At : ICE-20 Automatic Frozen Yogurt 1.5 Quart Ice Cream Maker...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || || Terms of Use || Contact || Privacy Policy
Load time: 0.0290 seconds