Guide :Ice Cream Makers : 4050 Il Gelatao Magnum 1 Quart Ice Cream Maker

I have an old simac il gelataio magnum ser.# 02328. the refrigeration works great. the plastic gearwheel on the spindle cracked and broke where it slips over the stainless spindle itself--probably from running it too long with the ice cream frozen practically solid--oops. can i get this part? or will i have to repair it?

Posted by ericnmimi on Apr 22, 2011

Research, Knowledge and Information :



We did not find results for: i have an old simac il gelataio magnum ser 02328 the refrigeration works great the plastic gearwheel on the spindle cracked and broke where it slips over the stainless spindle itself probably from running it too long with the ice cream frozen practically solid oops can i get this part or will i have to repair it.

Suggested Questions And Answer :


I have an old simac il gelataio magnum ser.# 02328. the refrigeration works great. the plastic gearwheel on the spindle cracked and broke where it slips over the stainless spindle itself--probably from running it too long with the ice cream frozen practically solid--oops. can i get this part? or will i have to repair it?


Simac is part of the Delonghi group.In USA contact: Customer careIn UK: Delonghi Genuine Parts UKRegards.Ginko
Read More At : 4050 Il Gelatao Magnum 1 Quart Ice Cream Maker...

My frozen cream maker does not make ice cream. The strawberry ice cream remains liquid after 35 minutes. Why


Read all about it here: http://icecreamscience.com/cuisinart-ice-30-ice-cream-maker-review/
Read More At : Cuisinart...

Over freezing ice cream....


Any water is going to solidify the mixture. Make sure you use heavy whipping cream, and not half-and-half or some other substitute. As far as the mixture freezing onto freezer bowl - use the supplied spatula to try to scrape it off, but I generally have to count that portion out as lost. Running warm water over it will quickly wash it off. Happy mixing! -Tha Mp3 Doctor
Read More At : ICE-20 Automatic Frozen Yogurt 1.5 Quart Ice Cream Maker...

Cuisinart Ice Cream Freezer Bowls Not Freezing Anymore


I would take the freezer bowls out of the freezer, run them both under the sink to thaw both bowls out, dry both bowls thoroughly, and then set them both on the counter so that the liquid settles toward the bottom of the freezer bowls. After 1 hour, place the bowls FLAT back into the freezer - don't forget to wrap them in a plastic grocery bag or some other sort of plastic bag. Try to make ice cream again after 24 hours or more of freezing. Let me know if this works, so I can pass the good news along to others.
Read More At : ICE-20 Automatic Frozen Yogurt 1.5 Quart Ice Cream Maker...

Tank won't freeze


The keys are to make sure the freezer is cold enough, and to make sure the bowl is level when it is sitting in the freezer. 24 hours is usually required, despite what manual says. If all else fails, the freezer bowls are replaceable - you can order them from Cuisinart - if you are in-warranty, they may even be able to give it to you for free. -tha Mp3 Doctor
Read More At : ICE-20 Automatic Frozen Yogurt 1.5 Quart Ice Cream Maker...

How long do I need to let it run before the ice cream is frozen?


Mcdevito75 here, Contact Rival at 800-557-4825 or 816-943-4100
Read More At : 8605-M 6 Quart Ice Cream Maker...

Not churning corectly


This sounds like a low on charge condition which you probably won't be able to repair yourself unless you are a refrigeration technician. There is a possibility that the cooling fan is not operational or the condenser is dirty. Two things that are very easy to check. First check the temperature of the tubing going to and from the compressor. Both will be hot if this is your problem. Blow out the condenser with compressed air. If it is greasy, use a cleaner. If the fan motor is not running, check for voltage at the motor. If there is no voltage check the switch and wiring. If there is replace the motor. If everything is clean and running the tubing from the compressor to the condenser should be hot to warm and the outlet around room temp. Run your fingers down the side of the condenser from the inlet. If it is cool after the first tubing bend, it is low on charge most likely and is probably not worth repairing.
Read More At : 4050 Il Gelatao Magnum 1 Quart Ice Cream Maker...

I am trying to repair a Simac Il Gelataio Magnum. It needs a new spindle drive gear, bearing and probably the spindle for the blade. Will I be able to locate these parts? The serial number is 02732. I see no other model number.


Some of these machines are just not worth repairing at times as the problem is spare parts ,now if it was a carpagarne or however its spelt then parts are available from italy direct from the factory but this machine i have never heard off ,if you cannot locate parts from the internet then chances are they are not available ,the bearings are not a problem as a auto factor will most likely have them or a timkin agent will have equilivent ,a engineering shop can and should be able to re manufacture parts in stainless for the machine if their willing and able .but i do know these soft ice cream machines cost a arm and a leg and i dont know why
Read More At : 4050 Il Gelatao Magnum 1 Quart Ice Cream Maker...

How long does it take to make ice cream?


Not long at all, maybe 20 minutes.
Read More At : Ice Cream Makers...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.icecreammakershop.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0365 seconds