Guide :Ice Cream Makers : 8420-TB 4 Quart Ice Cream Maker

Rival 8704 icecream maker jumps up and down and paddle turns

My grandmother has had this machine for a for a year or two and ever since she got it it starts jumping up and down and the paddle turns when the mixture gets close to the top. Someone has to hold it down hard so it´ll be still. But this time it started jumpin right away and we had put the mixture in the freezer like that! can anyone help?

Research, Knowledge and Information :



Han li thorn property rites filestube Rtl8188s airmon-ng Minecraft material spawner mod Lms staus for facebook Pokedex 3d keldeo ar marker Parallels desktop 6.0.12094 ...
Read More At :

Full text of "The Times News (Idaho Newspaper) 1978-03-26"

Full text of "The Times News (Idaho Newspaper) 1978-03-26" See other formats ...
Read More At :

Suggested Questions And Answer :

Ice Cream Maker 1 Quart: Need instruction booklet to make icecream recipe f...

Replacement parts are sometimes available here:
Read More At : Ice Cream Maker 1 Quart...

Motor runs top turns but dasher does not turn

On a white mountain, the dasher does not move at all. Its the can that turns about the dasher. If your unit has worked for a while, I'd say its probably not because of what Sam describes, but rather the gear set inside the unit is worn. They will become so worn that they no longer mesh. So the motor turns, but the output does not. You can either buy a new unit or have the one you have repaired. See this website.
Read More At : F69206X 6 Quart Ice Cream Maker...

Girmi grangelato icecream maker- no instruction manual

It is available at -
Read More At : GL14 Gran Gelato 1 Quart Ice Cream Maker...

I purchased a rival ice cream maker. I used it once and the ice cream came out great. The next time I used it the paddle didn't turn and the ice cream and paddle was frozen to the sides of the can. The ice cream in the middle wasn't frozen. I noticed when you try to turn the canister by hand it won't budge, but it turns ok when plugged in. Can you tell me what's wrong. My freezer is #8550-X. Shirley

The tub turns around the dasher(paddle). You live in a high humid area... to much ice and salt around outside. Plus you need to age the ice cream a few hours after mixing. See your book.
Read More At : 8550-X 5 Quart Ice Cream Maker...

I have an ice cream maker ice 45u but the mixer blade is not turning. The power is there because i can hear it and when i pull the leaver down the cogs turn on the sprinkler system are turning i have checked that the lid is on properly and that the mixing blade is fitted correctly ect. If i need to strip the ice cream maker down Could you please explain how to do it. many thanks Dave.

There is a coupler under the blade is everything is not seated and or if it is worn a bit it may not be driving the blade. What you need to do is put everything in place and then turn the unit on without anything in it. All you want to do is see if the blade turns. Turn it on then open up and see if the blade has moved. If it hasn't then the coupler is not working ie it is worn too badly if everything else is seated properly.If it has moved you may have a weak motor and it locks up under the load of mixing the cream mixture. About the only thing you can really fix is getting it seated properly. Anything else will entail taking it into a repair depot to get it repaired or replaced. Check if you have any warrenty, find out who does repairs, and find out what a new one costs. The store you purchased this at will know who or where the repair depot is. Or you can contact Cuisinart and they can help you find out who or where. Sometimes they offer a flat repair fee for out of warranty units. If you have no warranty you have to be careful as a new one may be quite a bit cheaper. I had a bad seal and could have bought almost two new ones for what they wanted if I sent it in. Just ask first before committing doing anything and you will get the best way to get ice cream again ;-]
Read More At : ICE-45 1.5 Quart Ice Cream Maker...

After plugging in the Maverick Ice Cream Shoppe shouldn't the paddle start turning? It is just humming.

Hi, Err - yes it should. If it is just buzzing, it sounds like a motor fault, or in particular the capacitor that provides the phase-shift for the motor to work. If you feel competent,unplug and take a look and see if things are still connected in there - particularly the large capacitor. If there appears no obvious problems - replace the Capacitor with an identical size. Get it the right way round though !
Read More At : MIC-001 1 Quart Ice Cream Maker...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || || Terms of Use || Contact || Privacy Policy
Load time: 0.0416 seconds